Enameled water tank
Instructions for selection of enameled water tank
The water tank is classified into stamped and flat ones.
Provide the water tank dimensions, the pipe joint position and the pipe diameter in the order.
No other parts shall be welded on the interior or exterior of the water tank, to prevent damaging the enamel.
Its load on the ground is to be verified by the structure designer.Regularly clean the water tank and prevent sundries from getting flushed in the tank during water testing.
When the water tank hole positions provided by the user is at the plate joints, the company will adjust it (without further notice) with the pipe diameter unchanged.
The water tank buttresses are 300mm wide, 1000mm spaced and at least 400mm high. Space between the water tank top and the roof shall be at least 600mm to facilitate installation.